Slovenian 
Instructions for Use
First, make sure you have the correct RRP bearing kit that matches the bearings you intend to install or remove (see the list below). You can identify the kit you need by reading the bearing number written on the rubber seal, or by measuring the inner and outer diameters of the bearing (as shown below) and comparing them to our list below
(note: the handles are shorter and thinner to reduce torque and thus the risk of damage due to misalignment/incorrect installation)
Bearing Removal (RED adapters) – SOLD SEPARATELY
Install the RED adapters from the RRP BEARING KIT as shown below, and ensure that all parts are aligned and level to prevent damage to the parts or frame. Specifically check that the female adapter is aligned with the frame to prevent frame damage.
Turn the main handle until all parts are assembled, and finally check that everything is properly aligned. Continue turning the main handle, which will allow the male adapter to pull the inner ring of the bearing and draw it into the female adapter (note: the male adapter passes through the female adapter to ensure even and proper extraction*); as the bearing begins to be drawn out, it will become harder to turn. After a few turns, stop and check that the bearing is extracting properly before continuing.
Installing Bearings (BLUE Adapters) – SOLD SEPARATELY
Install the BLUE adapters from the RRP BEARING KIT as shown below, ensuring all parts are aligned and properly fitted to prevent damage to the parts or frame.
Turn the main handle until all parts are assembled, and the male adapter should be pressing against the outer ring of the bearing you are installing. Perform a final check to ensure everything is aligned. Continue turning the main handle; the male adapter will press against the outer ring of the bearing and insert it (note: the male adapter passes through the female adapter to ensure even and proper insertion*). As the bearing begins to seat, it will become harder to turn. After a few turns, stop and check that the bearing is inserting correctly before continuing.
The most important thing is that the outer and inner dimensions match the table below. There are dozens of different bearing names with the same dimensions, so it’s not that important for the name to match exactly.
Bearing sets (sold separately) BEARING NAME SET NUMBER CODE RRP SIZE FROM SIZE FROM
688 2rs 1 BPET688 8 16
698 2rs / 398v 2 BPET698 8 19
608 2rs / 608E-2rs 3 BPET608 8 22
609 2rs 3a BPET609 9 24
6800 2rs / 61800 2rs 4 BPET6800 10 19
6900 2nd year / 61900 2nd year 5 BPET6900 10 22
6000 2nd year 6 BPET6000 10 26
6801 2nd year / 61801 2nd year 6a BPET6801 12 21
6901 2rs / 61901 2rs 7 BPET6901 12 24
6001 2rs 8 BPET6001 12 28
3802 2rs / 63802 2rs / 6802 2rs / 61802 2rs 9 BPET63802 15 24
1526 2rs 10 BPET1526 15 26
6902 2rs / 6902E-2rs / 61902 2rs / 7902 11 BPET6902 15 28
6002 2rs 12 BPET6002 15 32
6803 2rs / 61803 2rs 13 BPET6803 17 26
17287 2rs 13a BPET17287 17 28
6903 2rs / 6903E-2rs / 61903 2rs / 61903E-2rs 14 BPET6903 17 30
6003 2rs 15 BPET6003 17 35
6804 2rs / 61804 2rs 16 BPET6804 20 32
6805 / 61805 2rs 17 BPET6805 25 37
Bearing Insertion and Removal Tool (BPET) BPETHTB
BORE:
Bearing bore size (center bore)
OD:
Outer diameter of the bearing race
*Bearing sets 1, 2, and 3 do not include male adapters (all adapters are female) due to the small size of the bearing bore.
Reviews
There are no reviews yet.