EXT ARIA V2 DH – Air Rear Shock for Downhill and Freeride
EXT ARIA V2 DH is an air rear shock developed by Italian manufacturer EXTREME SHOX, specifically designed for downhill and freeride mountain bikes. It is based on the technology of the ARIA V2 model but features a specially adapted hydraulic system optimized for longer suspension travel and the higher loads typical of gravity riding.
The main feature of the shock is the patented AS3 system, which allows independent adjustment of two positive air chambers. By adjusting the pressure in each chamber, suspension support and progression can be modified without the use of volume spacers.
Compared to the standard ARIA V2 model, the DH version features a different HBC hydraulic bottom-out protection setting, which generates 20% more damping force in the final portion of the travel. The shock does not feature the LOK system, as it is designed for bikes where pedaling efficiency is not a priority.
AS3 – Dual Positive Air Chamber System
The patented AS3 technology uses two separate positive air chambers, identified as + and ++, allowing independent adjustment of the air spring characteristics.
By adjusting the pressure in each chamber, it is possible to control support throughout the shock’s travel and influence when and how progressively the spring rate increases.
Positive Chamber (+)
The chamber identified by a black valve provides the primary support and mainly affects performance during approximately the first 60% of travel.
Pressure in this chamber determines suspension sag (SAG) and is directly related to rider weight and riding style.
Additional Positive Chamber (++)
The second chamber, identified by a nickel-colored valve, mainly influences the middle and final portions of travel, approximately the last 40%.
Higher pressure increases support in the middle and final portions of travel and increases suspension progression. Lower pressure results in a more linear spring characteristic.
This design allows the shock to be adapted to different rear suspension systems and individual rider requirements.
Adjustable Progression Without Volume Spacers
In conventional air shocks, progression is often adjusted by adding or removing volume spacers, which change the volume of the air chamber.
ARIA V2 DH allows progression to be adjusted directly by changing the pressure in the additional positive chamber (++).
This makes it possible to adjust support in the middle and final portions of travel without disassembling the air chamber.
A high-pressure pump capable of reaching up to 600 psi is used to adjust the pressure.
HBC – Hydraulic Bottom-out Control
The HBC system provides additional hydraulic support in the final portion of the shock’s travel and reduces the risk of bottoming out during larger impacts and landings.
On the ARIA V2 DH, the system is specifically adapted for downhill use and generates 20% more damping force in the final portion of travel compared to the standard ARIA V2 model.
This setting provides increased support under heavy loads encountered during high-speed riding on demanding downhill tracks.
Hydraulic System and Adjustments
ARIA V2 DH uses a monotube hydraulic design with valves developed from the EXT V4 series.
The hydraulic system is specifically adapted to longer shock travel and the demands of downhill riding.
The shock allows independent adjustment of low-speed and high-speed compression and rebound damping:
- LSC (Low-Speed Compression): low-speed compression damping.
- HSC (High-Speed Compression): high-speed compression damping.
- LSR (Low-Speed Rebound): low-speed rebound damping.
- HSR (High-Speed Rebound): high-speed rebound damping.
Unlike the standard ARIA V2 model, the DH version does not feature the LOK system for pedaling support.
Improved Sensitivity and Reduced Friction
For the second generation of ARIA, EXT optimized the design and materials of the seals and changed the position of the internal guide.
The guide is positioned inside the shock, where it is in direct contact with the oil. This design reduces friction throughout the entire travel and provides more sensitive and consistent suspension performance.
These improvements are particularly important over successive bumps, where the suspension must respond quickly and in a controlled manner to changes in terrain.
Construction and Materials
ARIA V2 DH uses a 14 mm chrome-molybdenum shaft, providing stiffness and resistance to mechanical loads.
The hydraulic system includes a low-pressure bladder reservoir operating at 55 psi and EXT EV2S oil with a high viscosity index, which helps maintain consistent damping performance across different temperatures.
The redesigned construction, featuring a vertically positioned external reservoir and a more compact valve block, allows installation on a wider range of downhill frames.
Adaptation to Different Suspension Systems
The AS3 system allows the air spring characteristics to be adapted to different rear suspension leverage curves, including both more linear and progressive designs.
Settings can be adjusted according to rider weight, riding style, and the requirements of each frame.
For initial setup, EXT also offers the RideMaster online application, which provides recommended suspension settings based on bike specifications, rider information, and riding style.
Important: Before ordering, the correct shock dimensions, mounting type, and frame compatibility must be verified. Due to the range of individual adjustment options, we recommend consulting VETTA Trade before placing an order.








