EXT VAIA – Upside-Down Dual-Crown Air Fork for Downhill and Enduro
EXT VAIA is an upside-down (USD) dual-crown air fork developed by Italian manufacturer EXTREME SHOX, primarily designed for downhill and gravity mountain bikes. With travel options ranging from 170 to 200 mm and a modular axle system, it is also designed for use on certain aggressive enduro and electric mountain bikes.
The fork combines EXT’s motorsport experience with the advanced HS3 air spring system, CGB floating bushings, and a hydraulic damping system featuring three independent external adjustments. Its specialized construction provides a wide range of customization options, both in terms of suspension performance and front-end geometry.
USD – Upside-Down Dual-Crown Construction
VAIA features an inverted design, with the outer tubes positioned at the top and the sliding tubes at the bottom. The dual-crown construction is made from 7075 and 7050 T6 aluminum alloys, incorporating Grade 5 titanium components.
The 38.5 mm stanchion tubes feature a specialized surface treatment to reduce friction and wear. Their design is optimized for the balance between strength and weight.
This construction is designed to withstand the loads typical of downhill riding, where structural stiffness, precise front wheel tracking, and sensitive suspension performance are essential.
HS3 – Three-Chamber Air Spring System
EXT VAIA uses the HS3 system, which includes two separate positive air chambers (+ and ++) and a large negative air chamber with automatic pressure equalization.
The system allows independent adjustment of initial support, mid-stroke performance, and progression under higher loads.
Positive Chamber (+)
The main positive chamber determines the fork’s initial support and ride height. Air pressure primarily affects suspension sag and the initial characteristics of the air spring.
Additional Positive Chamber (++)
The second positive chamber allows support to be adjusted in the middle and final portions of the travel. By adjusting the pressure difference between the two chambers, it is possible to change when and how progressively support increases.
Higher pressure in the ++ chamber can increase bottom-out resistance, while the pressure ratio between the two chambers influences the spring characteristics throughout the travel.
Negative Air Chamber
The large negative chamber reduces the initial force required to compress the fork and improves sensitivity to small bumps.
Its volume can be adjusted using spacers, allowing further modification of initial support and air spring characteristics.
Adjustable Air Chamber Volume
In addition to independent pressure adjustment, the HS3 system allows the volume of individual air chambers to be modified using volume spacers.
Reducing the volume of the additional positive chamber (++) increases progression towards the end of the travel, while a larger volume provides a more linear response.
The volume of the negative chamber can also be adjusted, changing initial sensitivity and support throughout the travel.
This system allows the air spring to be adapted to different rider weights, riding styles, and terrain requirements.
CGB – Continuously Guided Bushing
VAIA features the CGB (Continuously Guided Bushing) floating bushing system, based on technology developed for motorsport applications.
The bushings are manufactured to precise tolerances and allow small radial movements, enabling them to adapt to lateral loads during fork operation.
The system provides a large overlap between the guiding surfaces, approximately 240 mm at sag for the 200 mm travel version.
This construction reduces friction under lateral loads and improves fork guidance and torsional stiffness, particularly during braking and cornering.
Hydraulic System and Adjustments
EXT VAIA features a high-flow hydraulic cartridge with three independent external adjustments.
- LSC (Low-Speed Compression): low-speed compression damping.
- HSC (High-Speed Compression): high-speed compression damping.
- Rebound: rebound damping adjustment.
The independent compression damping adjustments allow the fork’s response to be adapted to different suspension movement speeds. The rebound adjustment controls how quickly the fork returns after compression.
The hydraulic system uses highly responsive valves and low-friction seals, designed to maintain consistent performance even under high loads and during prolonged descents.
Adjustable Offset – 44 or 48 mm
VAIA offers two fork offset settings: 44 or 48 mm.
The system uses a special eccentric handlebar mount, developed in collaboration with Mojo Rising, which allows the offset to be changed without replacing the crowns or handlebar stem.
Changing the offset affects steering geometry and handling characteristics:
- 44 mm: shorter offset, which increases the geometric trail and can improve steering stability.
- 48 mm: longer offset, which reduces trail and can provide quicker steering response.
The choice depends on frame geometry, wheel size, and the desired handling characteristics.
Modular Axle System
VAIA uses a modular axle system made from Grade 5 titanium, allowing the use of two different front axle diameters:
- 15 × 110 mm (Boost): for compatible enduro configurations.
- 20 mm: for downhill configurations.
Switching between the two versions does not require replacing the main structural components of the fork, only the use of the appropriate adapter.
The titanium axle features a dual-hex design, providing precise wheel alignment and high torsional stiffness.
Two Upper Crown Options
To accommodate different frames, VAIA is available with two upper crown configurations:
- 10 mm Drop: for frame head tube lengths from 107 to 136 mm.
- 30 mm Drop: for frame head tube lengths from 127 to 156 mm.
Selecting the appropriate crown is important for correct fork installation and front-end height adjustment.
The dual-crown construction also allows the position of the tubes within the crowns to be adjusted within the limits specified by the manufacturer.
Construction and Materials
The main structural components of the fork are made from 7075 and 7050 T6 aluminum alloys, while selected fasteners and the axle are made from Grade 5 titanium.
The fork also features pressure relief valves in both legs, an optimized internal lubrication system, and the option to install a dedicated mudguard.
VAIA is available with 170, 180, 190, or 200 mm of travel, with configuration options depending on the intended use.
Compatibility and Fork Selection
EXT VAIA is primarily intended for downhill and gravity bikes, although the manufacturer also offers configurations for certain enduro and E-MTB bikes.
Before ordering, frame compatibility must be verified, particularly whether the frame is approved for use with a dual-crown fork, head tube height, the appropriate crown configuration, axle-to-crown length, front axle dimensions, and brake system compatibility.
Due to the wide range of customization options, we recommend consulting VETTA Trade before ordering to determine the appropriate configuration and initial suspension settings.










