EXT VECTA is a rear coil shock from the Italian manufacturer EXTREME SHOX, designed for trail and enduro mountain bikes. It has been developed as a more affordable alternative to the STORIA V4 model, whilst retaining the key hydraulic technologies, build quality and wide range of settings characteristic of EXT suspension.
The VECTA utilises a monotube design with three external damping adjustments. The hydraulic valves are based on those of the STORIA V4, whilst the HBC system is factory-set. This design reduces the need for additional adjustment whilst allowing the performance to be tailored to the rider’s weight, suspension geometry and riding style.
HBC – Hydraulic Bottom-out Control
The HBC system gradually increases compression damping during the final 15 per cent of the shock’s travel. This reduces the risk of bottoming out during heavy impacts and landings, and allows the use of a softer spring to improve traction where the suspension design permits.
On the VECTA model, HBC is factory-set and does not feature an external adjuster, unlike the STORIA V4. The setting is designed to suit a wide range of riders without the need for further adjustment.
LOK 2.0 – Hydraulic support whilst pedalling
LOK 2.0 utilises a separate hydraulic circuit that provides additional compression support whilst pedalling.
The system is separate from the main hydraulic circuit and allows for individual adjustment of performance via internal valve settings to suit the rider’s needs.
Hydraulic system and settings
VECTA uses hydraulic valves based on the STORIA V4 model. High oil flow through the valves reduces the impact of temperature changes on damping performance and helps prevent cavitation.
The shock absorber offers three external adjustments:
- LSC (Low-Speed Compression): low-speed compression damping.
- HSC (High-Speed Compression): high-speed compression damping.
- LSR (Low-Speed Rebound): low-speed rebound damping.
The LSC and HSC compression settings can be adjusted using standard 4 mm and 5 mm Allen keys.
Construction and materials
The VECTA utilises a 14-millimetre chrome-molybdenum piston rod and an enhanced surface protection on the main body, which increases wear resistance.
The hydraulic system incorporates a diaphragm-type reservoir with a low pressure rating of 55 psi, which contributes to the shock absorber’s responsive operation during small suspension movements.
EXT EV2S hydraulic oil with a high viscosity index is used, which minimises changes in damping characteristics due to temperature.
An additional negative spring reduces the risk of hard impacts when the shock absorber is fully extended, whilst the spring thrust bearings help maintain spring alignment and reduce friction and noise during operation.
Compatibility and shock absorber selection
The EXT VECTA is available in various sizes with either standard or Trunnion mounts. Before ordering, check the correct size, mount type and compatibility with the bike frame.
The spring is selected separately based on the rider’s weight, the rear suspension design and the intended use.
We recommend consulting VETTA Trade beforehand to ensure the correct choice of shock absorber and spring.









