EXT STORIA V4 is the fourth generation of rear suspension shock absorbers from the Italian manufacturer EXTREME SHOX. It has been developed for mountain bikes where suspension sensitivity, rear-wheel traction and precise adjustment of hydraulic settings are key.
Compared to its predecessor, the STORIA V3, it features a redesigned hydraulic system, an externally adjustable HBC bottom-out protection system, a new PSR rebound damping system and improved performance over consecutive bumps. Design changes also ensure quieter operation and greater durability.
HBC – Hydraulic Bottom-out Control
The HBC system gradually increases compression damping in the final 15 per cent of the shock absorber’s travel, thereby reducing the risk of bottoming out during heavy impacts and bounces.
On the STORIA V4 model, the HBC is adjustable via an external control, allowing the level of hydraulic support to be adjusted without needing to access the interior of the shock absorber. The system also allows the use of a softer spring where the suspension design and riding style permit.
PSR – Position Sensitive Rebound
The new PSR hydraulic system adjusts rebound damping according to the shock’s position within its travel. Its main function is to reduce impacts at full suspension extension (top-out) and to improve rear-end stability.
LOK 2.0 – Pedalling Support
LOK 2.0 utilises a separate hydraulic valve that provides additional compression support whilst pedalling.
The system operates independently of the basic damping settings and can be tailored to the needs of the individual rider.
Frequency-Dependent Damping
The STORIA V4 incorporates a hydraulic valve whose response depends on the suspension’s operating frequency. It is designed to improve performance on undulating terrain, particularly when encountering rapid, successive bumps.
Construction and materials
The shock absorber utilises a 14-millimetre chrome-molybdenum piston rod with a DLC coating, which reduces surface friction and increases wear resistance.
The low-pressure reservoir (55 psi) with a diaphragm design enables sensitive shock absorber operation during small movements. The hydraulic system uses the specially developed EXT EV2S oil with a high viscosity index.
The design also incorporates spring thrust bearings, which help maintain correct alignment under lateral loads.
Damping settings
The STORIA V4 offers four external settings:
- LSC (Low-Speed Compression): low-speed compression damping.
- HSC (High-Speed Compression): high-speed compression damping.
- LSR (Low-Speed Rebound): low-speed rebound damping.
- HBC (Hydraulic Bottom-out Control): hydraulic bottom-out protection.
In addition, the shock is equipped with the LOK 2.0 system for pedalling support.
With a wide range of settings, the performance can be tailored to the suspension characteristics, the rider’s weight and riding style.
Important: EXT recommends using the E-STORIA or VECTA models for bikes with the Yoke lever system. Before ordering, please check the shock’s compatibility with the frame.








