EXT ARIA V2 – Air Rear Shock for Trail and Enduro
EXT ARIA V2 is the second generation of the air rear shock developed by Italian manufacturer EXTREME SHOX, designed for trail and enduro mountain bikes. It combines the advantages of air suspension, particularly the ability to adjust spring characteristics, with high sensitivity to small bumps, typically associated with coil shocks.
The main feature of the ARIA V2 is its patented AS3 technology, which uses two independently adjustable positive air chambers. This system allows separate adjustment of initial support and suspension progression without the need to change air chamber volume using spacers.
Compared to its predecessor, the ARIA V2 features a redesigned construction, improved seals to reduce friction, and a more compact component layout, allowing compatibility with a wider range of frames.
AS3 – Dual Positive Air Chamber System
The patented AS3 technology uses two separate positive air chambers, identified as + and ++, allowing precise adjustment of the air spring characteristics.
By adjusting the pressure in each chamber, it is possible to control support throughout the shock’s travel and determine when and how progressively the spring rate increases.
Positive Chamber (+)
The chamber identified by a black valve determines the shock’s primary support and mainly affects performance during approximately the first 60% of travel.
Pressure in this chamber is directly related to rider weight, riding style, and suspension sag.
Additional Positive Chamber (++)
The second chamber, identified by a nickel-colored valve, mainly influences the middle and final portions of travel, approximately the last 40%.
Higher pressure increases support in the middle and final portions of travel and increases suspension progression. Lower pressure results in a more linear spring characteristic.
This design allows the shock’s performance to be adapted to different rear suspension systems and riding styles.
Adjustable Progression Without Volume Spacers
In conventional air shocks, progression is often adjusted by adding or removing volume spacers, which change the volume of the air chamber.
ARIA V2 allows progression to be adjusted directly by changing the pressure in the ++ chamber.
This provides more precise adjustment of support in the middle and final portions of travel without mechanically changing the air chamber volume.
A dedicated EXT high-pressure pump capable of reaching 600 psi is included for adjustment.
HBC – Hydraulic Bottom-out Control
The HBC system provides additional hydraulic support in the final portion of the shock’s travel, reducing the risk of bottoming out during larger impacts or landings.
On the ARIA V2, HBC is adjustable, allowing bottom-out protection to be fine-tuned independently of the air chamber characteristics.
LOK 2.0 – Hydraulic Support During Pedaling
LOK 2.0 is an independent hydraulic system that provides additional compression support during pedaling.
The system uses a separate hydraulic circuit that can be adapted to the rider’s needs without changing the basic compression and rebound damping settings.
Hydraulic System and Adjustments
ARIA V2 uses a monotube hydraulic design with compression valves developed from the EXT V4 series.
The shock allows adjustment of low-speed and high-speed compression and rebound damping:
- LSC (Low-Speed Compression): low-speed compression damping.
- HSC (High-Speed Compression): high-speed compression damping.
- LSR (Low-Speed Rebound): low-speed rebound damping.
- HSR (High-Speed Rebound): high-speed rebound damping.
The shock also features the HBC system for bottom-out protection and LOK 2.0 for pedaling support.
Improved Sensitivity and Reduced Friction
For the second generation of ARIA, EXT optimized the design and materials of the seals and changed the position of the internal guide.
The guide is now positioned inside the shock, where it is in direct contact with the oil. This design reduces friction throughout the entire travel and improves suspension sensitivity during small movements.
Construction and Materials
ARIA V2 uses a 14 mm chrome-molybdenum shaft, providing stiffness and resistance to mechanical loads.
The hydraulic system includes a bladder reservoir with a low pressure of 55 psi and EXT EV2S oil with a high viscosity index, helping ensure consistent damping performance across different temperatures.
The redesigned construction, featuring a vertically positioned external reservoir and a more compact valve block, allows installation on a wider range of frames.
Adaptation to Different Suspension Systems
The AS3 system allows the air spring characteristics to be adapted to different rear suspension leverage curves, including both more linear and progressive designs.
Settings can be adjusted according to rider weight, riding style, and the requirements of each frame.
For initial setup, EXT also offers the RideMaster online application, which provides recommended suspension settings based on bike specifications, rider information, and riding style.
Important: Before ordering, the correct shock dimensions, mounting type, and frame compatibility must be verified. Due to the range of individual adjustment options, we recommend consulting VETTA Trade before placing an order.








